Leak Detection Service

---

Leaks can be a tough and expensive issue if not handled timely and correctly the first time.  We understand this can be a frustrating circumstance.  We at Paramount Pool Services have over the years learned intricate methods to locating leaks and repair them successfully.  Our technicians are trained and equipped with state-of-the-art technology as well the most basic of methods to check all areas of the pool and spa.

We always say finding a leak is like trying to "locate a needle in a haystack" but it is not impossible. Our techs are trained to locate the leak with precision and offer repair solutions if one cannot be done onsite.  Most leaks are found in the body of the pool, in that case we find the leak and patch it with epoxy puddy, hydraulic cement, or bytle tape. This would be included in the price of the leak detection. However, in some cases we find the leak in the pvc line(s) under the deck, such as the return line, skimmer line and such. In these cases, we will attempt to plug the leak for now and we will send you an estimate on the price of repair. You will still be responsible for the leak location charge. 

Our leak detection fees:

• ​Fees start at $349 for standard 15’ x 30’ Pool and Spa. (If we can patch it right then and there with epoxy putty, hydraulic cement, or bytle tape then it is included in the price of the leak detection.)  (Standard leak repairs are guaranteed for 30 days, must be same leak)
• Certain issues may increase the fee (Cold water, dark finishes, all tile, waterfalls, and/or larger pools)
• Estimates maybe furnished onsite or within 24-48 hours.
• Standard leak checks are guaranteed for 30 days, it is only guaranteed for the same leak that was repaired.
• Call back charges will apply if there is no leak found when called back.
• All underground repairs are guaranteed for 1 year.

Our techs are trained to leave your pool in optimal performance, at times leak detections can take time but rest assured we will find the leak and repair them.  They will always ensure the safety of all baby fences and backyard fences properly closed once they are finished.  We record all our results within our Work Order Network System updated in real-time, all date stamped and accounted for.  All our trucks are GPS tracked for optimal time efficiency and accountability.  Our entire staff is connected to each one of our service accounts for quicker but efficient response times.


How to perform a BUCKET TEST to determine your pool is leaking:

1. Have your pool filled to its standard level. This is usually halfway up the tile or halfway up the mouth of the skimmer.
2. Using a 5-gallon bucket, fill it up ¾ of the way up the bucket and place it on the first step or second step inside the pool.
3. With a pencil or such mark, the water level inside the bucket where the water level is. (This will represent the evaporation rate.)
4. With a pencil or such mark, the water level on the outside of the bucket where the water level is. (This will represent the pool leak rate.)
5. Come back in 24 hours to compare the inside water level to the outside water level marks. If the water level outside the bucket has dropped more than the water level inside the bucket, you likely have a pool leak and need to call a professional.
6. You can re-do the test with the pool pump on then do the test again with the pool pump off.
7. Make sure to turn any autofill valve off and close access to the pool.
8. Make a note to check the bucket at exactly the 24-hour mark, as waiting longer than this can give inaccurate results. If it rains you will have to wait and start over when there is a clear forecast. Please understand in South Florida dry season a normal pool can lose up to 1 inch per week to normal evaporation, it can also increase if water features are constantly on, if you are heating the pool, and or if you have wind.

---